sam/pleroma
sam/pleroma
1
0
Fork 0
Code Issues Pull requests Projects Releases Wiki Activity

clean-up docs to avoid mismatches in BE and FE. Clearly state that stable-versions are installed

Browse source
This commit is contained in:
Stefan 2022-12-16 17:23:31 +01:00 committed by FloatingGhost
parent 1fd5c4b221
commit 11ec4e1b8f
8 changed files with 19 additions and 19 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
docs/docs/administration/CLI_tasks/frontend.md
View file

@ -24,20 +24,20 @@ Currently, known `<frontend>` values are:
You can still install frontends that are not configured, see below.
## Example installations for a known frontend
## Example installations for a known frontend (Stable-Version)
For a frontend configured under the `available` key, it's enough to install it by name.
=== "OTP"
```sh
./bin/pleroma_ctl frontend install pleroma-fe
./bin/pleroma_ctl frontend install pleroma-fe --ref stable
```
=== "From Source"
```sh
mix pleroma.frontend install pleroma-fe
mix pleroma.frontend install pleroma-fe --ref stable
```
This will download the latest build for the pre-configured `ref` and install it. It can then be configured as the one of the served frontends in the config file (see `primary` or `admin`).

4
docs/docs/administration/updating.md
View file

@ -1,6 +1,6 @@
# Updating your instance
You should **always check the [release notes/changelog](https://akkoma.dev/AkkomaGang/akkoma/src/branch/develop/CHANGELOG.md)** in case there are config deprecations, special update steps, etc.
You should **always check the [release notes/changelog](https://akkoma.dev/AkkomaGang/akkoma/src/branch/stable/CHANGELOG.md)** in case there are config deprecations, special update steps, etc.
Besides that, doing the following is generally enough:
## Switch to the akkoma user
@ -57,7 +57,7 @@ sudo systemctl stop akkoma
# Run database migrations
mix ecto.migrate
# Update frontend(s). See Frontend Configration doc for more information.
# Update Pleroma-FE frontend to latest stable. For other Frontends see Frontend Configration doc for more information.
mix pleroma.frontend install pleroma-fe --ref stable
# Start akkoma (replace with your system service manager's equivalent if different)

6
docs/docs/installation/alpine_linux_en.md
View file

@ -84,12 +84,12 @@ doas adduser -S -s /bin/false -h /opt/akkoma -H -G akkoma akkoma
**Note**: To execute a single command as the Akkoma system user, use `doas -u akkoma command`. You can also switch to a shell by using `doas -su akkoma`. If you don’t have and want `doas` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell.
* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory:
* Git clone the AkkomaBE repository from stable-branch and make the Akkoma user the owner of the directory:
```shell
doas mkdir -p /opt/akkoma
doas chown -R akkoma:akkoma /opt/akkoma
doas -u akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma
doas -u akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git -b stable /opt/akkoma
```
* Change to the new directory:
@ -109,7 +109,7 @@ doas -u akkoma mix deps.get
* This may take some time, because parts of akkoma get compiled first.
* After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instances):
```shell
doas -u akkoma mv config/{generated_config.exs,prod.secret.exs}

6
docs/docs/installation/arch_linux_en.md
View file

@ -75,12 +75,12 @@ sudo useradd -r -s /bin/false -m -d /var/lib/akkoma -U akkoma
**Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell.
* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory:
* Git clone the AkkomaBE repository from stable-branch and make the Akkoma user the owner of the directory:
```shell
sudo mkdir -p /opt/akkoma
sudo chown -R akkoma:akkoma /opt/akkoma
sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma
sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git -b stable /opt/akkoma
```
* Change to the new directory:
@ -100,7 +100,7 @@ sudo -Hu akkoma mix deps.get
* This may take some time, because parts of akkoma get compiled first.
* After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instances):
```shell
sudo -Hu akkoma mv config/{generated_config.exs,prod.secret.exs}

6
docs/docs/installation/debian_based_en.md
View file

@ -49,12 +49,12 @@ sudo useradd -r -s /bin/false -m -d /var/lib/akkoma -U akkoma
**Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell.
* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory:
* Git clone the AkkomaBE repository from stable-branch and make the Akkoma user the owner of the directory:
```shell
sudo mkdir -p /opt/akkoma
sudo chown -R akkoma:akkoma /opt/akkoma
sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma
sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git -b stable /opt/akkoma
```
* Change to the new directory:
@ -74,7 +74,7 @@ sudo -Hu akkoma mix deps.get
* This may take some time, because parts of akkoma get compiled first.
* After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instances):
```shell
sudo -Hu akkoma mv config/{generated_config.exs,prod.secret.exs}

6
docs/docs/installation/fedora_based_en.md
View file

@ -74,12 +74,12 @@ sudo useradd -r -s /bin/false -m -d /var/lib/akkoma -U akkoma
**Note**: To execute a single command as the Akkoma system user, use `sudo -Hu akkoma command`. You can also switch to a shell by using `sudo -Hu akkoma $SHELL`. If you don’t have and want `sudo` on your system, you can use `su` as root user (UID 0) for a single command by using `su -l akkoma -s $SHELL -c 'command'` and `su -l akkoma -s $SHELL` for starting a shell.
* Git clone the AkkomaBE repository and make the Akkoma user the owner of the directory:
* Git clone the AkkomaBE repository from stable-branch and make the Akkoma user the owner of the directory:
```shell
sudo mkdir -p /opt/akkoma
sudo chown -R akkoma:akkoma /opt/akkoma
sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git /opt/akkoma
sudo -Hu akkoma git clone https://akkoma.dev/AkkomaGang/akkoma.git -b stable /opt/akkoma
```
* Change to the new directory:
@ -99,7 +99,7 @@ sudo -Hu akkoma mix deps.get
* This may take some time, because parts of akkoma get compiled first.
* After that it will ask you a few questions about your instance and generates a configuration file in `config/generated_config.exs`.
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instance, `dev.secret.exs` for development instances):
* Check the configuration and if all looks right, rename it, so Akkoma will load it (`prod.secret.exs` for productive instances):
```shell
sudo -Hu akkoma mv config/{generated_config.exs,prod.secret.exs}

2
docs/docs/installation/otp_redhat_en.md
View file

@ -37,7 +37,7 @@ sudo dnf install git gcc g++ erlang elixir erlang-os_mon erlang-eldap erlang-xme
```shell
cd ~
git clone https://akkoma.dev/AkkomaGang/akkoma.git
git clone https://akkoma.dev/AkkomaGang/akkoma.git -b stable
```
* Change to the new directory:

2
docs/docs/installation/verifying_otp_releases.md
View file

@ -12,7 +12,7 @@ Release URLs will always be of the form
https://akkoma-updates.s3-website.fr-par.scw.cloud/{branch}/akkoma-{flavour}.zip
```
Where branch is usually `stable` or `develop`, and `flavour` is
Where branch is usually `stable` and `flavour` is
the one [that you detect on install](../otp_en/#detecting-flavour).
So, for an AMD64 stable install, your update URL will be